https://congcusanxuat.vn Công cụ sản xuất Thu, 11 Apr 2024 06:51:23 +0000 vi hourly 1 https://wordpress.org/?v=6.5.8 https://congcusanxuat.vn/wp-content/uploads/2020/03/cropped-logo2-2-32x32.gif https://congcusanxuat.vn 32 32 https://congcusanxuat.vn/san-pham/cam-bien-laser-keyence-lr-xh100-lr-xn11n/ Thu, 11 Apr 2024 06:51:23 +0000 https://congcusanxuat.vn/?post_type=product&p=17062 Sample LR-XH100 Type Cable length: 2 m Detection distance 25.0 to 100.0 mm Standard detectable deviation 1,0 mm Screen resolution 0,1 mm Point size Approx. 0.3 mm × Approx. 2 mm
(at a detection distance of 100 mm) Light source Type Green laser (505 nm) Laser type Class 1 laser products (IEC60825-1, FDA (CDRH), Part1040.10 ^*1 ) Environmental resistance Weather resistance rating for the enclosure IP65/IP67(IEC60529) Ambient light Bulb light: 16,000 lx or less, Sunlight: 16,000 lx or less Ambient temperature -10°C to +50°C (no freezing) Ambient humidity 35 to 85% RH (no condensation) Vibration resistant 10 to 500 Hz; Power spectral density: 0.816 G ² /Hz in X, Y and Zs axis directions Resistant to impact 1,000 m/s ² (100G); each 6 times in X, Y and Z axis directions Material Case: SUS316L; Lens hood: PSU; Spacer: FKM (lens cap), EVM (cable) Accessory Laser warning label Mass approximately 75 g ^*1 Classification is carried out based on IEC60825-1 standards as required by Laser Notice No. 56 for FDA (CDRH). ]]> https://congcusanxuat.vn/san-pham/cam-bien-quang-dien-keyence-pr-g51cn/ Thu, 11 Apr 2024 06:49:56 +0000 https://congcusanxuat.vn/?post_type=product&p=17060 Model PR-G51CN Type Thrubeam Shape Rectangular Output NPN Cable connection M8 connector (4 pin) Detecting distance 30 m 98.43′ Number of control outputs 2 (Dark-ON +Light ON)^*1 Output operation Output 1 Dark-ON Output 2 Light-ON^*2 Response time 1 ms Sensitivity adjustment One-turn trimmer (230°) Spot diameter ― Light source 4 elements, Red LED (631 nm) Light interference prevention function ― Indicator lamp Transmitter: power supply indicator (green)
Receiver: output indicator (yellow),
Stable operation indicator (green) Control output NPN open collector
30 VDC or less, 100 mA or less
Residual voltage: 1.2 V or less at less than 10 mA, 2 V or less at 10 to 100 mA Stop emission input Non-voltage input
Input time ON: 1 ms or more,
OFF: 20 ms or more Protection circuit Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection Rating Power voltage 10 to 30 VDC, including Ripple (P-P) 10 % Power consumption Transmitter: 450 mW max.
(15 mA max. at 24 V, 15 mA max. at 12 V)
Receiver: 360 mW max.
(12 mA max. at 24 V, 15 mA max. at 12 V) Environmental resistance Enclosure rating IP68 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)^*3 Insulation resistance 20 MΩ or more (500 VDC) Ambient light Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less Ambient temperature -20 to +70 °C -4 to 158 °F (No freezing)^*4 Storage temperature -20 to +70 °C -4 to 158 °F Relative humidity 35 to 85 % RH (No condensation) Withstand voltage 1,000 VAC, 50/60 Hz, 1 min Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions Shock resistance 1,000 m/s², 6 times in each of the X, Y, and Z directions Material Case: SUS 316L,
Indicator cover: PES,
7-segment display cover/Lens cover: PMMA (scratch-resistant coating)
M18 nut: Brass (Nickel plating),
Lock washer: Steel (Chrome plating) Accessories Instruction manual Weight Approx. 55 g ^*1 For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output.
^*2 Output 2 is not available on the threaded mount type or M8 3-pin type.
^*3 For the connector type, the enclosure rating varies depending on the cable that is used.
^*4 When the ambient temperature is 60 °C 140 °F or higher, the device should be powered with no more than 24 VDC and 50 mA. ]]> https://congcusanxuat.vn/san-pham/cam-bien-sieu-am-keyence-fw-h02/ Thu, 11 Apr 2024 06:48:54 +0000 https://congcusanxuat.vn/?post_type=product&p=17058 Sample FW-H02 Type Standard type Detection range 50 to 200 mm ^*1 Response speed 250 ms Temperature change 0.25% of FS/°C ^*2 *3 Lights Operation indicator light (orange) x1 (FW-H02/07: Turns on when the power is turned on. FW-H10R: Turns on when the target is within the detection range.) Size M18 x P1, Length= 63.5 mm Environmental resistance Weather resistance rating for the enclosure IP67 Ambient temperature -25 to +70 °C (No freezing) Ambient humidity 35 to 85 % RH (No condensation) Vibration resistant 10 to 55 Hz, 1.5 mm Dual amplitude in X, Y, Z directions respectively, 2 hours Material Nickel plated copper, PBT, Polyurethane, Polyamide plastic Accessory M18 nuts: 2, 2 m head cable, Standard installation bracket (FW-B01) Mass Approx. 89 g (including 2 m lead cable) ^*1 A less stable region of approximately 2% of the FS exists even at the end of the detection range.
^*2 Error for indicated value at 25°C.
^*3 Changes in the speed of sound in air give rise to errors in the negative direction of 25°C or more, or in the positive direction of 25°C or less. ]]> https://congcusanxuat.vn/san-pham/cap-ket-noi-cam-bien-keyence-op-87628/ Thu, 11 Apr 2024 06:47:42 +0000 https://congcusanxuat.vn/?post_type=product&p=17056 https://congcusanxuat.vn/san-pham/cam-bien-keyence-pr-g51n/ Thu, 11 Apr 2024 06:45:19 +0000 https://congcusanxuat.vn/?post_type=product&p=17054 Sample PZ-G51N Type Independent transceiver
Standard ^*1 Shape Rectangular shape Way out NPN Connect the cable Cable (2 m) ^*1 Detection distance 20 m Spot diameter ― Light source Red LED light Adjust sensitivity 1-turn fine-tuning capacitor (230°) Response time 500 µs Operation mode ON-BIGHT/ON-DARK (switch selectable) Indicator light (LED) Power (T): Orange LED
Output (R): Orange LED
Stable operation: Green LED Light
receiving
: Red LED Control output Open collector output 30 V max, 100 mA max, Residual voltage: 1 V max Protection circuit Reverse polarity, overcurrent protection, lightning absorbing arrester Eliminate interference Up to 2 blocks
(When polarizing filter is attached) Tightening torque Rectangular model (Installation hole part): 0.5 N·m max Quota Power voltage 10 to 30 VDC, including Ripple (PP) ±10 % Current consumption Transmitter: 20 mA or less, Receiver: 28 mA or less Environmental resistance Weather resistance rating for the enclosure IEC: IP67/NEMA: 4X, 6, 12/DIN: IP69K Ambient light Bulb light: Maximum 5,000 lux, Sunlight: Maximum 20,000 lux Ambient temperature -20 to +55 °C (No freezing) Ambient humidity 35 to 85 % RH (No condensation) Vibration resistant 10 to 55 Hz, 1.5 mm Dual amplitude in X, Y, Z directions respectively, 2 hours Resistant to impact 1,000 m/s ^2.6 times in X, Y, and Z directions Material Housing, M18 nut
(threaded models only) Glass fiber reinforced PBT Lens cover Polyarylate (PAR) Fine-tuning capacitors Polyamide (PA) reinforced glass fiber Cable (cable models only) Polyvinyl chloride (PVC) Connector (connector with cable only) ― Accessory Guide notebook Mass Rectangular cable model: Approx. 60 g (stand-alone transceiver model player: Approx. 50 g) ^*1 Cable options for connector models. ]]> https://congcusanxuat.vn/san-pham/cam-bien-keyence-fu-95/ Thu, 11 Apr 2024 06:43:59 +0000 https://congcusanxuat.vn/?post_type=product&p=17052 Sample FU-95 Number of optical axes 1 mm Fiber equipment set length 2 m High cutting capacity Diameter of fiber optic device ø1.0×2 Minimum bend radius of optical fiber R10 mm Environmental resistance Ambient temperature -40 to +70 °C Mass Approx. 7 g ]]> https://congcusanxuat.vn/san-pham/cam-bien-keyence-pz-v31/ Thu, 11 Apr 2024 06:41:30 +0000 https://congcusanxuat.vn/?post_type=product&p=17050 Sample PZ-V31 Type Smart reflexes Output type NPN Detection distance 5 to 300 mmwhite matte paper100 x 100 mm) ^*1 Distance setting 40 to 300 mm (100 x 100 mm white matte paper) Light source Red LED light Adjust sensitivity Automatic push button Response time Maximum 1 ms (maximum 1.2 ms alternative frequency type, maximum 2 ms with M61 only. ^*2 ) Operation mode ON-BIGHT/ON-DARK (switch selectable) Lights Output and power: Orange LED, Stable operation: Green LED ^*3 Control output NPN: 100 mA (24 V) max/PNP: 100 mA (24 V) max, Residual voltage: 1 V max Digital screen 7-segment, 3-digit red LED Protection circuit Reverse polarity, overcurrent protection, lightning absorbing arrester Quota Power voltage 12 to 24 VDC ±10 %, ripple (PP) 10 % or less Current consumption for
Amplifier Maximum 37 mA Environmental resistance Weather resistance rating for the enclosure IP67 Ambient light Bulb lamp maximum 5,000 lux, Sunlight: Maximum 20,000 lux Ambient temperature -20 to +55 °C (No freezing) Ambient humidity 35 to 85 % RH (No condensation) Vibration resistant 10 to 55 Hz, 1.5 mm Dual amplitude in X, Y, Z directions respectively, 2 hours Resistant to impact 1,000 m/s ^2.6 times in X, Y, and Z directions Cover Glass fiber reinforced plastic Accessory ― Mass Approx. 55 g (Including 2 m cable) ^*1 Detection distance is achieved with maximum sensitivity.
^*2 Alternate frequency type is specified by replacing the “1” located at the end of the model name with “5”. Models PZ-M65, M15, M35, M75, V15, V35 and V75.
^*3 The PZ-M51 player is only equipped with one power indicator light. ]]> https://congcusanxuat.vn/san-pham/cam-bien-keyence-pr-g41n/ Thu, 11 Apr 2024 06:39:55 +0000 https://congcusanxuat.vn/?post_type=product&p=17048 Model PR-G41N Type Diffuse reflective (Long distance) Shape Rectangular Output NPN Cable connection 2 m cable Detecting distance 500 mm19.685″ Number of control outputs 2 (Dark-ON +Light ON)^*1 Output operation Output 1 Light-ON Output 2 Dark-ON^*2 Response time 0.5 ms Sensitivity adjustment Five-turn trimmer Spot diameter ø20 mm ø0.79″ max.
(at 300 mm 11.81″) Light source 4 elements, Point light source red LED (650 nm) Light interference prevention function 2 Indicator lamp 7 segment display (0 to 999), output indicator (yellow) Control output NPN open collector
30 VDC or less, 100 mA or less
Residual voltage: 1.2 V or less at less than 10 mA, 2 V or less at 10 to 100 mA Stop emission input ― Protection circuit Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection Rating Power voltage 10 to 30 VDC, including Ripple (P-P) 10 % Power consumption 450 mW max. (15 mA max. at 24 V, 21 mA max. at 12 V) Environmental resistance Enclosure rating IP68 (IEC60529), IP69K (DIN40050-9),
4X, 6P, 13 (NEMA250)^*3 Insulation resistance 20 MΩ or more (500 VDC) Ambient light Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less Ambient temperature -20 to +70 °C -4 to 158 °F (No freezing)^*4 Storage temperature -20 to +70 °C -4 to 158 °F Relative humidity 35 to 85 % RH (No condensation) Withstand voltage 1,000 VAC, 50/60 Hz, 1 min Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions Shock resistance 1,000 m/s², 6 times in each of the X, Y, and Z directions Material Case: SUS 316L,
Indicator cover: PES,
7-segment display cover/Lens cover: PMMA (scratch-resistant coating)
M18 nut: Brass (Nickel plating),
Lock washer: Steel (Chrome plating) Accessories Instruction manual Weight Approx. 75 g ^*1 For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output.
^*2 Output 2 is not available on the threaded mount type or M8 3-pin type.
^*3 For the connector type, the enclosure rating varies depending on the cable that is used.
^*4 When the ambient temperature is 60 °C 140 °F or higher, the device should be powered with no more than 24 VDC and 50 mA. ]]>