MODEL				MM-410B-00-10
Measurement Specification	Current	Range		1×Sensitivity toroidal coil：0.100-2.000kA / 0.30-6.00kA / 1.00-20.00kA / 3.0-60.0kA / 10.0-200.0kA 10×Sensitivity toroidal coil：0.010-0.200kA / 0.030-0.600kA / 0.100-2.000kA / 0.30-6.00kA / 01.00-20.00kA
		Item		PEAK / RMS* / Arithmetic mean RMS
	Voltage	Range		0.30-6.00V / 1.0-20.0V
		Item		PEAK / RMS* / Arithmetic mean RMS
	Force	Range		4.90-98.06N (MA-520B), 49.0-980.6N (MA-521B), 245-4903N (MA-770A), 490-9806N (MA-522B, MA-771A)
		Item		Mean RMS/maximum (peak) Before welding / After welding / Constant
	External	Input voltage / current range		ｰ10 to +10 V / 4 to 20 mA
		Range		±0.5 to 10V or 4.8 to 20mA (5% to 100% of rated setting)
		Item		Mean RMS/maximum (peak) Before welding / After welding / Constant
	Measurement time	Current Voltage Power Resistance	AC	ms-AC	1～5000ms
				CYC-AC	0.5～250.0CYC(50Hz)、0.5～300.0CYC(60Hz)
				CYC***Hz-AC	0.5～200.0CYC(M050：50Hz)、0.5～300.0CYC(M063：63Hz)、 0.5～2000.0CYC(M500：500Hz)
				LONG CYC-AC	0.5～500.0CYC(50Hz)、0.5～600.0CYC(60Hz)
			DC	CYC-DC	0.5～100.0CYC(50Hz)、0.5～120.0CYC(60Hz)
				ms-DC	1～2000ms
				SHORT ms-DC	0.50～300.00ms(0.05ms increment)
		Force External		1～10000ms
	Conduction angle			0-180 degrees
	No. of schedules			127 schedules
Body Specification	Power supply			Single-phase 100 to 240 V (50/60 Hz) AC adapter output 9V DC
	Power consumption			7.8W (in normal time) 30W (in charge time) when two batteries are installed
	External data output			USB / Ethernet (Protocol; TCP/IP)
	Languages			Japanese, English, Chinese, Korean, German, French, Spanish.
	Outer dimensions(W×D×H) Not including projections			224(W)mm×47(D)mm×157(H)mm
	Mass			Approx. 0.9 kg

* ISO17657 Compliance

MB-35E

1.0 x sensitivity, 13⁄8 in I.D. (35 mm)

Model		IS-300A-00-00	IS-300A-00-01
Power requirements (Fixed at ex-factory)		3-phase, 200–240 VAC ±10% (50/60 Hz)	3-phase, 380–480 VAC ±10% (50/60 Hz)
Max. output current		300A (Peak value)
Number of schedules		255
Output frequency		600Hz to 3kHz (In 100 Hz increments)
Control method		Primary constant-current RMS Secondary constant-current RMS Secondary constant-power RMS Primary constant-current PEAK (with pulse width limit funcution) Secondary constant-voltage RMS Constant-phase control
Timer setting range		msec mode / cyc mode
	SQUEEZE DELAY	0000 to 9999ms/000 to 999cyc
	SQUEEZE	0000 to 9999ms/000 to 999cyc
	UP SLOPE 1,2,3	000 to 999ms/00 to 50cyc
	WELD 1,2,3	000 to 999ms/000 to 50cyc
	DOWN SLOPE 1,2,3	000 to 999ms/00 to 50cyc
	COOL 1,2	000 to 999ms/000 to 999cyc
	HOLD	00000 to 20000ms/000 to 999cyc
	OFF ＊1	0 or 0010～9990ms/00～99cyc
Transformer turns ratio		1.0 to 199.9
Pulsation setting		01 to 19
Valve setting		2
Setting range (1)Constant current *2　(2)Constant power (3)Constant voltage　(4)Constant phase		(1)0.1 to 20.0kA (2)0.1 to 20.0kW
		(3)0.20 to 9.99V (4)10.0 to 99.9%
Current monitor		HIGH 0.00 to 9.99kA / LOW 00.0 to 99.9kA
Power monitor		HIGH 00.00 to 99.99kW / LOW 000.0 to 999.9kW
Voltage monitor		0.00 to 9.99V
Pulse width monitor		HIGH 10.0 to 100%
Cooling method		Air-cooled
Data communication		RS-232C (One-way communication) / RS-485 (Bidirectional communication)
Operating environment	Ambient temperature	+5～+40℃
	Humidity	90% max. (no condensation)
	Altitude	1000m max.
Mass		16.5kg

*1: No repetitive operation will be performed if “0” is selected for OFF (off time).
*2: Primary current can be set up to 300 A.