Esco – Hà Sơn

Van tay vặn đồng Esco EA470D-6

Pham Huyen — Fri, 22 Mar 2024 02:53:03 +0000

Van tay vặn đồng Esco EA470D-6

Max pressure-Still water (120℃ or below): 1.18MPa (12kgf/cm2)， Saturated steam: 0.88MPa (9kgf/cm2)
Material-Brass (body)
Screw dim. (PT)	3/4

Pham Huyen — Fri, 22 Mar 2024 02:51:57 +0000

Túi nhựa Esco EA995AD-43 (30pc/bag)

Material-LLDPE
-41 to -44-Transparent bag
-46 to -49-Translucent bag
Eco-mark certified product
Capacity	70L	Dim. (mm)	800 x 900 x 0.04
Qty. per unit	30 pcs
We use 100% eco-friendly plastic recycled raw materials.

Pham Huyen — Fri, 22 Mar 2024 02:50:47 +0000

Tô vít 4 cạnh dài Esco EA560PE-2F

Non slip grip even if a hand is moistened.
Tip x Shaft D	#2 x 7mm	Shaft L	400mm

Pham Huyen — Fri, 22 Mar 2024 02:49:40 +0000

Thiết bị mài mũi khoan Esco EA826EG

Power source-100VAC， 50/60Hz
Grinding range-2.5 to 19mm (Tip angle 118°， 135°)
RPM-15，000rpm
Dim.-230 x 120 x 115(H)mm
For grinding or thinning ironwork or stonework drills
Long size (19mm) supported
Removing margins and angles adjustable
Standard accessories-Chuck (2.5 to 19mm)，Grinding wheel (#180) x 2,Ground 3P⇒2P　conversion adapter
Code length-1.8m (with earth)
Case dim.-140 x 350 x 290(H)mm
Available for cemented carbide， high-speed， titanium， carbide and concrete drills
Easy centering

Pham Huyen — Fri, 22 Mar 2024 02:48:11 +0000

Thiết bị đo lực căng Esco EA715BD-3

For tension measurement of pulling spring and pushing spring
Length-237 to 502mm
Min. division	0.125N	Max. weighing capacity	5N

Pham Huyen — Fri, 22 Mar 2024 02:46:53 +0000

Thanh bẩy Esco EA519AM-1

Hammerhead bar， so hammering is possible.
Rubber grip
Material	Steel (black oxide)	Length	300mm
Tip width	16mm	Shaft dia.	9.5mm

Pham Huyen — Wed, 20 Mar 2024 07:41:16 +0000

Pham Huyen — Wed, 20 Mar 2024 07:40:05 +0000

Súng khí Esco EA123AD-5 (WS501-A)

Pham Huyen — Wed, 20 Mar 2024 07:38:11 +0000

Súng khí bơm keo Esco EA123VA-5

Pipe dim.-Dia. 50 x 235mm
Length-380mm
Weight-1，050g
Inlet-Rc (PT) 1/4
Operating pressure-0.41 to 0.62MPa
Air consumption-100L/min
It can also be used for a seesaw type silicone sealer.
It can be used to fill gaps, eyes and cracks.
With plug
Material	Aluminum
Adjustment of pressure and adjustment of spray distance are possible. Bead shape,
Spray-like, coating-like patterns can be adjusted

Pham Huyen — Wed, 20 Mar 2024 07:36:40 +0000