Howa – Hà Sơn

Mâm kẹp Howa H011MC8

Pham Huyen — Fri, 29 Mar 2024 08:00:49 +0000

specification

Model number			H011MC
specification			Four	Five	6	8	Ten	12
Claw stroke (in diameter)		mm	Five	Five	7.2	7.2	10.8	10.8
Plunger stroke (cylinder stroke)		mm	7	7	Ten	Ten	15	15
Maximum/minimum grasp diameter (outer diameter)		Max mm	110	130	165	210	254	304
Maximum/minimum grasp diameter (outer diameter)		min mm	18	twenty five	35	40	50	50
Maximum operating speed		r/min	3500	3500	3500	3000	2500	2000
Allowable cylinder force		kN	6.0	Ten	15	twenty five	35	45
grasping power		kN	10.5	17	twenty five	45	60	75
Moment of inertia		kg・^m2	0.007	0.016	0.051	0.15	0.37	0.79
mass		kg	4.5	7.5	15	26	45	70
Compatible cylinder
HH4C	Model number		63	80	100	125	140	160
HH4C	highest use pressure	MPa	2.2	2.3	2.1	2.2	2.4	2.3
H05CH	Model number		150	175	200	250	300	300
H05CH	highest use pressure	MPa	0.4	0.4	0.5	0.5	0.5	0.6
Image diagram			PDF	PDF	PDF	PDF	PDF	PDF

Mâm kẹp Howa H037M8

Pham Huyen — Fri, 29 Mar 2024 07:58:19 +0000

specification

Model number			H037M
specification			Four	Five	6	8	Ten	12	(15)
Serration pitch		mm	1.5	1.5	1.5	1.5	1.5	1.5	―
Serration pitch		mm	―	―	―	―	―	―	3
Claw stroke (in diameter)		mm	5.4	5.4	6.3	7.6	9.3	10.6	11.9
Plunger stroke (cylinder stroke)		mm	Ten	Ten	15	18	twenty two	twenty five	28
Maximum/minimum grasp diameter (outer diameter)		Max mm	110	135	165	210	254	304	381
Maximum/minimum grasp diameter (outer diameter)		min mm	Five	Ten	18	12	16	38	60
Maximum operating speed		r/min	7000	6000	5800	4800	4200	3200	2500
Allowable cylinder force		kN	11.8	13.7	19.6	29.4	39.2	49.0	68.6
grasping power		kN	22.6	25.5	56.9	83.4	113	142	191
Moment of inertia		kg・^m2	0.006	0.014	0.048	0.16	0.34	0.75	2.30
mass		kg	3.7	6.3	13.3	twenty two	39	62	116
Compatible cylinder
HH31C	Model number		Four	Five	―	―	―	―	―
HH31C	Maximum working pressure	MPa	3.5	3.5	―	―	―	―	―
C1TA	Model number		―	―	115	140	165	190	(215)
C1TA	Maximum working pressure	MPa	―	―	2.8	2.6	2.8	2.6	3.3
HH4C	Model number		80	80	100	125	140	160	180
HH4C	Maximum working pressure	MPa	2.8	3.2	2.8	2.6	2.8	2.6	2.9
H05CH	Model number		200	200	200	250	300	300	―
H05CH	Maximum working pressure	MPa	0.4	0.5	0.7	0.6	0.6	0.7	―
Image diagram			PDF	PDF	PDF	PDF	PDF	PDF	PDF

Note: Models in parentheses are made to order.

Bộ Xilanh thủy lực HOWA HH4C80

Pham Huyen — Mon, 11 Apr 2022 01:08:38 +0000

A standard lightweight standard rotating hydraulic cylinder is capable of high speeds.
The direction of the drain port in relation to the supply port of hydraulic oil can be changed as needed, enabling simpler piping.

Chấu kẹp Howa H3KT8

Pham Huyen — Wed, 01 Sep 2021 04:17:29 +0000

Mâm kẹp Howa H3YS6

Pham Huyen — Wed, 01 Sep 2021 04:15:47 +0000

Xilanh thủy lực Howa C1TA115

Pham Huyen — Wed, 01 Sep 2021 04:12:12 +0000

Mâm kẹp Howa H011MC6

Pham Huyen — Wed, 01 Sep 2021 04:06:49 +0000

Mâm cặp Howa H01MA6

Pham Huyen — Wed, 01 Sep 2021 04:04:16 +0000

Mâm Kẹp Thủy Lực Howa ( Power chuck)

Pham Huyen — Wed, 27 May 2020 04:13:33 +0000

Howa Machinery provides different types of power chucks such as a general purpose non-through-hole type, a hollow type with a central through hole, a draw down type that grips the workpiece by the end faces and draw it down for the purpose of finishing, a power change type for use if the worpiece has low rigidity, a swing lock type for rough processing, and a compensating type which is ideal for clamping with reference to the center hole of the workpiece. In order to get the most effective and lasting use from a power chuck, it is extremely important that you select the correct power chuck for your purpose.