Panasonic – Hà Sơn

Cảm biến an toàn PANASONIC NA2-N24 (NPN) (Bao gồm cáp)

Pham Huyen — Tue, 16 Apr 2024 06:04:44 +0000

Item	Specifications
Product Number	NA2-N24-PN
Part Number	NA2-N24-PN
Sensing height	460 mm 18.110 in
Sensing range	5 m 16.404 ft
Beam pitch	20 mm 0.787 in
Sensing object	dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects)
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Power consumption:Emitter:Job indicator ON	1.1 W or less
Power consumption:Emitter:Job indicator OFF	1.0 W or less
Power consumption:Receiver:Job indicator ON	1.1 W or less
Power consumption:Receiver:Job indicator OFF	1.0 W or less
Output	PNP open-collector transistor – Maximum source current: 100 mA – Applied voltage: 30 V DC or less (between output and +V) – Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Output:Utilization category	DC-12 or DC-13
Output:Output operation	ON when all beam channels are received (OFF when one or more beam channels are interrupted)
Output:Short-circuit protection	Incorporated
Response time	10 ms or less (12 ms or less when the interference prevention function is used)
Indicators:Emitter	Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators:Receiver	Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit.
Interference prevention function	Incorporated
Test input (emission halt) function	Incorporated
Pollution degree	3 (Industrial environment)
Protection	IP40(IEC)
Ambient temperature	-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element	Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note：Peak emission wavelength has been changed from production in March, 2017.)
Material	Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic
Cable	0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long
Cable extension	Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable.
Weight(Total weight of emitter and receiver)	Net weight: 570 g approx. Gross weight: 750 g approx.

Cảm biến tiệm cận PANASONICGX-8ML

Pham Huyen — Tue, 16 Apr 2024 06:03:08 +0000

Item	Performance characteristics
CE Marking Directive Compliance	EMC Directive, RoHS Directive
Max. Operation Distance	2 mm 0.079 in plus or minus 15 % (Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Stable Sensing Range	0 to 1.6 mm 0 to 0.063 in (Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Standard Sensing Object	Iron sheet 12 × 12 × t 1 mm 0.472 × 0.472 × t 0.039 in
Hysteresis	10 % or less of operation distance (with standard sensing object)
Repeatability	40 microm 1.575 mil or less
Supply Voltage	10 to 30 V DC Ripple P-P 10% or less
Current Consumption	15 mA or less
Output	NPN open-collector transistor – Maximum sink current: 200 mA(Note) – Applied voltage: 30 V DC or less (between output and 0 V) – Residual voltage: 1.5 V or less (at 200 mA sink current), 0.4 V or less (at 50 mA sink current) (Note：The maximum sink current varies depending on the ambient temperature.)
Output: Utilization Category	DC-12 or DC-13
Output: Output Operation	Normally open
Output: Short-Circuit Protection	Incorporated
Max. Response Frequency	500 Hz
Operation Indicator	Red LED (lights up when the output is ON)
Protection	IP67 (IEC)
Ambient Temperature	-25 to + 70 ℃ -13 to +158℉, Storage: -25 to +80 ℃ -13 to +176℉
Ambient Humidity	35 to 95 % RH, Storage: 35 to 95 % RH
Voltage Withstandability	500 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance	50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock Resistance	300 m/s² acceleration (30 G approx.) in X, Y and Z directions ten times each
Sensing Range Variation: Temperature Characteristics	Over ambient temperature range -25 to +70 ℃ -13 to +158℉: Within + 15/- 10 % of sensing range at +20 ℃ +68℉
Sensing Range Variation: Voltage Characteristics	Within ±2.5 % for plus or minus15 % fluctuation of the supply voltage
Material	Enclosure: Brass (Nickel plated), Resin part: ABS
Cable	0.14 mm² 3-core oil, heat and cold resistant cabtyre cable, 3 m 9.843 ft long
Cable Extension	Extension up to total 100 m 328.084 ft is possible with 0.14 mm², or more, cable.
Weight (Typ.)	Net weight: 60 g approx. (Note：The given weight of the threaded type includes the weight of nuts and toothed lock washers.)
Accessories	Nut: 2 pcs. Toothed lock washer: 1 pc.

Pin PANASONIC EZ9L10

Pham Huyen — Tue, 16 Apr 2024 06:00:37 +0000

Brand

‎パナソニック(Panasonic)

Model Number

‎EZ9L10

Product Dimensions

‎3.5 x 3.7 x 8.2 cm; 70 g

Name List for Name Plates

‎Compatible Charger: EZ7410

Wallpaper Pattern

‎Single Item

Voltage

‎3.6 Volts

Are Batteries Included

‎Yes

Battery Type

‎Lithium Ion

Item Weight

‎70 g

Máy vặn vít PANASONIC EZ7411 LA1JH1

Pham Huyen — Tue, 16 Apr 2024 05:58:40 +0000

High speed・Low speed		○
clutch		21 paragraphs
Auto-stop function		○
Screw tightening count function		○
Hand tightening function		○
LED Light		○
Battery pack		Voltage: DC3.6V Capacity: 1.5Ah (LA type, lithium ion)
charging time		Approx. 15 minutes for practical charging, approx. 35 minutes for full charging ^*1
Chuck		One-touch bit lock system (dimensions up to step are 11.5mm and 13mm)
Maximum tightening torque (elastic body tightening torque)		High speed: 1.5N･m{15kgf･cm} Low speed: 4.4N･m{45kgf･cm}
Rotational Speed		High speed: 600 rpm Low speed: 200 rpm (2-speed)
Clutch operating torque		21-level adjustment (approx. 0.3 to 2.9 N･m {3 to 30 kgf･cm} in increments of approx. 0.1 N･m {1.3 kgf･cm})
Body dimensions		Overall length 217 x overall height 148 x width 46mm (pistol type) ^*2
本体質量（重量）		490g^※2
Counting method		Count up/count down (with preset function)
Maximum count		99
Double closing count time		0 to 3 seconds (in 0.1 second increments)
Capacity (approximate, when fully charged)	screw tightening	Wood screws, lauan (φ3.1×13mm) approx. 600 pieces screws, lauan (φ3.5×20mm) approx. 125 pieces Machine screws, iron (M4×10mm with spring washer) approx. 770 pieces approx. 1.3 seconds/piece Machine screws, iron (M5×8mm) approx. 1,000 pieces approx. 1.2 seconds/piece
	Drilling	Metalwork/SPC (φ2×1mm) approx. 85 holes Metalwork/Aluminum (φ2×2.5mm) approx. 125 holes

Mô tơ PANASONIC MZ9G9B

Pham Huyen — Tue, 16 Apr 2024 05:56:15 +0000

Item	Specifications
Part Number	MZ9G9B
Details	Ball bearing, reduction ratio of 9
Size	90 mm sq.
Bearing	Ball bearing
Hinge	without
Applicable motor	Compact AC Geared Motors Shin-G Series Brushless Motors MINAS-BL GU/GV Series

Rơ le PANASONIC AQA211VL

Pham Huyen — Tue, 16 Apr 2024 05:55:30 +0000

Item	Performance characteristics
Zero-Cross Function	Zero-cross
Output Side: Max. Load Current	15A
Output Side: Load Voltage	75 to 250Vrms
Type of Load	AC type
Terminal Type	Screw terminal
Packing Quantity	Carton
Packing Quantity; Inner Carton (Pcs.)	2
Packing Quantity; Outer Carton (Pcs.)	60
Input Side: Input Voltage	4 to 32V DC
Input Side: Drop-Out Voltage	Min. 1V
Output: Non-Repetitive Surge Current	150A
Output Side: Max. Off-State Leakage Current	10mA
Operate Time (Initial) (at 20°C)	1/2 cycle of voltage sine wave + 1ms
Release Time, Max.	1/2 cycle of voltage sine wave + 1ms
I/O Isolation Voltage	4,000 Vrms between input and output 2,500 Vrms between input, output and case
Ambient Temperature	-20°C to +80°C
Storage Temperature	-20°C to +85°C
Snubber Circuit	With snubber circuit
Function	Built-in varistor, With LED indication
Load current (A)	15
Load Voltage [ V_L ]	75 to 250Vrms
Input voltage	4 to 32V DC

Cảm biến quang PANASONIC CX-411-P

Pham Huyen — Tue, 16 Apr 2024 05:53:29 +0000

Item	Specifications
Product Number	CX-411-P
Part Number	CX-411-P
Applicable regulations and certifications	CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range	10 m 32.808 ft
Sensing object	Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
Hysteresis	–
Repeatability(perpendicular to sensing axis)	0.5 mm 0.020 in or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	Emitter: 15 mA or less Receiver: 10 mA or less
Output	PNP open-collector transistor – Maximum source current: 100 mA – Applied voltage: 30 V DC or less (between output and +V) – Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Output:Output operation	Switchable either Light-ON or Dark-ON
Output:Short-circuit protection	Incorporated
Response time	1 ms or less
Operation indicator	Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Stability indicator	Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Power indicator	Green LED(lights up when the power is ON) (incorporated on the emitter)
Sensitivity adjuster	Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Automatic interference prevention function	Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
Protection	IP67 (IEC)
Ambient temperature	– 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance	500 m/s²acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated)	Red LED
Emitting element (modulated):Peak emission wavelength	680 nm 0.027 mil
Material	Enclosure: PBT (polybutylene terephthalate) Lens: acrylic Indicator cover: acrylic
Cable	0.2 mm²3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable (both emitter and receiver).
Weight	Net weight: 95 g approx. Gross weight: 100 g approx.
Accessory	–

Bộ khởi động đèn PANASONIC FG-1EL-10-30W

Pham Huyen — Tue, 16 Apr 2024 05:52:16 +0000

Bộ khởi động đèn PANASONIC FG-1EL-10-30W

Cảm biến PANASONIC CX-422

Pham Huyen — Tue, 16 Apr 2024 05:50:49 +0000

Item	Specifications
Product Number	CX-422
Part Number	CX-422
Applicable regulations and certifications	CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range	800 mm 31.496 in (Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object.
Sensing object	Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis	15 % or less of operation distance (Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object.
Repeatability(perpendicular to sensing axis)	1 mm 0.039 in or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	15 mA or less
Output	NPN open-collector transistor – Maximum sink current: 100 mA – Applied voltage: 30 V DC or less (between output and 0 V) – Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operation	Switchable either Light-ON or Dark-ON
Output:Short-circuit protection	Incorporated
Response time	1 ms or less
Operation indicator	Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Stability indicator	Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Power indicator	–
Sensitivity adjuster	Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Automatic interference prevention function	Incorporated(Two units of sensors can be mounted close together.)
Protection	IP67 (IEC)
Ambient temperature	– 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance	500 m/s²acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated)	Infrared LED
Emitting element (modulated):Peak emission wavelength	860 nm 0.034 mil
Material	Enclosure: PBT (polybutylene terephthalate) Lens: acrylic Indicator cover: acrylic
Cable	0.2 mm²3-core cabtyre cable, 2 m 6.562 ft long
Cable extension	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight	Net weight: 50 g approx. Gross weight: 60 g approx.
Accessory	–

Động cơ PANASONIC M8MX25GK4CG (4P, 380V, 25W, 50Hz)

Pham Huyen — Tue, 16 Apr 2024 05:48:48 +0000

Item	Specifications
Part Number	M8MX25GK4CG
Details	sealed connector
Voltage / Frequency	380 V/400 V (50 Hz)
Specification	80 mm (3.15 inch) sq. Output: 25 W
Standard	International standard certified motor (UL/CSA, CE, CCC) China efficiency standard compliant motor (GB)
Protection class	IP54