Cảm biến
Hiển thị tất cả 7 kết quả
-
Cảm biến Panasonic EX-21B (Ultra-compact Photoelectric Sensor)
Quick ViewProduct Number : EX-21B
Part Number : EX-21B
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range : 1 m 3.281 ft
Sensing object : Min. dia. 2.6 mm dia. 0.102 in opaque object (Setting distance between emitter and receiver: 1 m 3.281 ft)
Hysteresis –
Repeatability(perpendicular to sensing axis) : 0.05 mm 0.002 in or less
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption : Emitter: 10 mA or less
Receiver: 10 mA or less
Output NPN open-collector transistor
– Maximum sink current: 50 mA
– Applied voltage: 30 V DC or less (between output and 0 V)
– Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization category : DC-12 or DC-13
Output:Short-circuit protection : Incorporated
Response time : 0.5 ms or less
Operation indicator : Orange LED (lights up when the output is ON) (located on the receiver)
Stability indicator : Green LED (lights up under stable light received condition or stable dark condition), located on the receiver
Sensitivity adjuster –
Operation mode switch –
Protection : IP67 (IEC)
Ambient temperature : -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity : 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance : Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability : 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance : 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance : 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance : 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element : Red LED (modulated)
Emitting element:Peak emission wavelength : 640 nm 0.025 mil
Material : Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable : 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension : Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Weight : Net weight (each emitter and receiver): 20 g approx
Gross weight: 60 g approx
Accessory – -
Cảm biến Panasonic EX-31B (Threaded Miniature Photoelectric Sensor)
Quick ViewProduct Number : EX-31B
Part Number : EX-31B
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range : 500 mm 19.685 in
Sensing object : dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects)
Hysteresis –
Repeatability(perpendicular to sensing axis) : 0.05 mm 0.002 in or less
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption: Emitter: 10 mA or less
Receiver: 10 mA or less
Output NPN open-collector transistor
– Maximum sink current: 50 mA
– Applied voltage: 30 V DC or less (between output and 0 V)
– Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization category : DC-12 or DC-13
Output:Output operation Dark-ON
Output:Short-circuit protection Incorporated
Response time : 0.5 ms or less
Operation indicator : Orange LED (lights up when the output is ON)
(incorporated on the receiver)
Stability indicator : Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver)
Sensitivity adjuster –
Pollution degree : 3 (Industrial environment)
Protection : IP67 (IEC)
Ambient temperature : -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity : 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance : Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability : 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance : 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance : 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance : 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element : Red LED (modulated)
Material : Enclosure: Die-cast zinc (Nickel plated)
Lens: Polycarbonate
Enclosure cover: Polycarbonate
Cable : 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Weight : Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Accessory : Nut: 2 pcs
Toothed lock washer: 2 pcs -
Cảm biến Panasonic HG-C1200 (CMOS type Micro Laser Distance Sensor)
Quick ViewProduct Number HG-C1200
Part Number HG-C1200
Applicable standard EMC Directive Compliance, FDA Standard
Measurement center distance 200 mm 7.874 in
Measuring range ±80 mm 3.150 in
Repeatability 200 μm 7.874 mil
Linearity ±0.2%F.S.
Temprerature characteristics 0.03% F.S./℃
Light source Red semiconductor laser Class 2 [JIS/IEC/GB/FDA (Note) ]
Max. output: 1 mW
emission peak wavelength: 655 nm 0.026 mil
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).
Beam diameter ø300 μm 11.8111 mil approx.
(Note) This is the size in the measurement center distance. These values were defined by using 1/e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value.
Supply voltage 12 to 24 V DC ±10 %, Ripple P-P 10 % or less
Current consumption 40 mA or less (at 24V DC supply voltage)
65 mA or less (at 12V DC supply voltage)
Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 ： 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage)
Control output NPN open-collector transistor
– Maximum sink current: 50 mA
– Applied voltage: 30 V DC or less (Between control output to 0V)
– Residual voltage: 1.5 V or less (At 50 mA sink current)
– Leakage current: 0.1 mA or less
Control output:Output operation Either Light-ON or Dark-ON
Control output:Short-circuit protection Incorporated (Auto reset type)
Analogue output : Analog voltage output • Output range: 0 to 5 V (at alarm: +5.2 V)
• Output impedance: 100Ω
Analogue output : Analog current output • Output range: 4 to 20mA (at alarm: 0mA)
• Output impedance: 300Ω or less
Note : Analog current output has been added from shipment in August 2016.
Response time Switchable between 1.5 ms / 5 ms / 10 ms
External input NPN non-contact input
– Input conditions
Invalid: +8 to +V DC or Open
Valid: 0 to +1.2 V DC
– Input impedance: 10 kΩ approx.
Pollution degree 2
Operating altitude 2,000 m 6561.680 ft or less
Protection IP67 (IEC)
Ambient temperature -10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 ℓx or less at the light-receiving face
Vibration resistance 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Cable 5-core composite cable, 2 m 6.5617 ft long
Cable extension Extension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable.
Material Enclosure: Aluminum die-cast
Front cover: Acrylic
Weight Net weight: 35 g approx. (without cable), 85 g approx. (including cable) -
Cảm biến Panasonic NA2-N28 (General Purpose & Slim Body Area Sensor)
Quick ViewProduct Number NA2-N28
Part Number NA2-N28
CE marking directive compliance EMC Directive, RoHS Directive
Sensing height 540 mm 21.260 in
Sensing range 5 m 16.404 ft
Beam pitch 20 mm 0.787 in
Sensing object dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects)
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Power consumption:Emitter:Job indicator ON 1.2 W or less
Power consumption:Emitter:Job indicator OFF 1.1 W or less
Power consumption:Receiver:Job indicator ON 1.2 W or less
Power consumption:Receiver:Job indicator OFF 1.1 W or less
Output NPN open-collector transistor
– Maximum sink current: 100 mA
– Applied voltage: 30 V DC or less (between output and 0 V)
– Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization category DC-12 or DC-13
Output:Output operation ON when all beam channels are received (OFF when one or more beam channels are interrupted)
Output:Short-circuit protection Incorporated
Response time 10 ms or less (12 ms or less when the interference prevention function is used)
Indicators:Emitter Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators:Receiver Operation indicator: Red LED (lights up when one or more beam channels are interrupted)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
* When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit.
Interference prevention function : Incorporated
Test input (emission halt) function : Incorporated
Pollution degree 3 (Industrial environment)
Protection IP40(IEC)
Ambient temperature -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance : 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element : Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note：Peak emission wavelength has been changed from production in March, 2017.)
Material : Enclosure: Heat-resistant ABS
Lens cover: Polyester
Indicator cover: Acrylic
Cable : 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long
Cable extension : Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable.
Weight(Total weight of emitter and receiver) : Net weight: 650 g approx.
Gross weight: 800 g approx. -
Cảm biến Panasonic WTKG2411-P
Quick ViewDòng điện định mức : 3A
Đường kính : 070
Thời gian hẹn giờ tắt : 10 giây – 30 phút
Tuổi thọ pin : 100.000 bật tắt -
Cảm biến quang Panasonic CX-491 (Photoelectric Sensor)
Quick ViewCable Length: 2mHousing
Material: PBTInput
Voltage: 12-24VDCMax
Operating Temperature: 131 F
Min Operating Temperature: -13 F
Output Mode: PNP
Protection Rating: IP67
Response Time: 1 ms or less
Scanning Distance: 3 m
