Mô tả
| Model | CTU01 | CTU02 | CTU04 | CTU06 | CTU10 | CTU16 | CTU25 | ||
| Cylinder force (hydraulic pressure 7MPa) kN | 2.4 | 2.8 | 4.4 | 6.3 | 9.9 | 16.3 | 25.8 | ||
| Cylinder inner diameter mm | 25 | 29 | 36 | 42 | 52 | 65 | 82 | ||
| Rod diameter mm | 14 | 18 | 22.4 | 25 | 30 | 35.5 | 45 | ||
| Effective area (clamp) cm2 | 3.4 | 4.1 | 6.2 | 8.9 | 14.2 | 23.3 | 36.9 | ||
| Swing angle | 90°±3° | ||||||||
| Positioning pin groove position accuracy | ±1° | ||||||||
| Repeated clamp positioning accuracy | ±0.5° | ||||||||
| Full stroke mm | 16 | 18 | 20.5 | 23.5 | 26.5 | 28.5 | 36 | ||
| 90°swing stroke mm | 8 | 10 | 12.5 | 13.5 | 16.5 | 18.5 | 23 | ||
| Clamp stroke mm | 8 | 8 | 8 | 10 | 10 | 10 | 13 | ||
| Max. swing torque 1 N·m | 0.6 | 0.7 | 1.6 | 1.8 | 3.4 | 5.6 | 9.3 | ||
| Cylinder capacity | Clamp | cm3 | 5.4 | 7.3 | 12.8 | 21.0 | 37.5 | 66.4 | 132.9 |
| Unclamp | cm3 | 7.9 | 11.9 | 20.9 | 32.6 | 56.3 | 94.6 | 190.1 | |
| Mass kg | 0.7 | 0.9 | 1.3 | 1.7 | 2.8 | 4.7 | 9.9 | ||
| Recommended tightening torque of mounting screws 2 N·m | 3.5 | 7 | 7 | 12 | 29 | 57 | 77 | ||
| Recommended tightening torque of nut N·m | 12 | 26 | 51 | 60 | 86 | 120 | 180 | ||
| ● Pressure range：1‒7 MPa ● Proof pressure：10.5 MPa ● Operating temperature：0‒70 ℃
● Fluid used：General mineral based hydraulic oil (ISO-VG32 equivalent) ● Seals are resistant to chlorine-based cutting fluid. (not thermal resistant specification) |
1：This is the limit value for lifting arm at 1 MPa when mounted vertically. 2：ISO R898 class 12.9 Manifold piping and G
