Phụ Kiện - Vật Tư Khác
Hiển thị 1–25 của 31 kết quả
-
Dây an toàn ESCO EA998FD-47 (Full Harness Type Safety Belt)
Size-Shoulder belt width:45mm,
Thigh belt width:45mm
Rope size-Main lanyard:Dia.11 x 1700mm,
Sub lanyard:Dia.11 x 1300mm
Rope Material-Nylon
Steel hook.
With shock absorber
Weight-1640g
2 piece account full harness safe area -
Dây an toàn ESCO EA998P-10 (Safety Belt (with Shock Absorber))
Weight-950g
Belt dim.- 50 x 2.0(T) x 1,200mm
Flat rope dim.-Approx. 18 x 1,500mm -
Đèn báo Patlite LKEH-FA/C/D/E (Signal Tower)
IMENSIONS – 100mm diameter
RATED VOLTAGE – 24V DC
– 100V AC
– 220V AC
AUDIBLE STYLE – LKEH-FE available only
– Total of 32 pre-recorded sounds (See Specifications for sound list)
– Arrange in 8 selectable sound groups
– Each group has 4 pre-arranged sounds
VOLUME – Maximum 105dB at 1 meter with adjustable volume control
BODY STYLE – Pre-assembled, pre-wired only for module colors specified, lens interchangeable after purchase
BODY COLOR – Body: Light gray
GLOBE COLORS – Red
– Amber
– Green
– Blue
– White
GLOBE MATERIAL – Polycarbonate Resin
PROTECTION RATING – IP53
OPTIONS – SDV-2GP -
Đèn cây ESCO EA983FW-26A (LED Small Signal light (Pole installation /Dia 40))
Pole installation Type
Material Body ・The unit :Polycarbonate 、Pole :Aluminum
Rated Voltage DC24V
Light Source LED bulb
Color Red ・Yellow ・Green
Body Size Dia 40×219mm
Pole Size Dia 21.7×300mm
Weight 565g
Code Length 1000mm
With mounting brackets (Fix them with commercial screws and nuts. )
Installation Bracket size 75×80×3(t)mm
No need to change wires even when the color arrangement has been changed.
Compatible with IP54. Usable in a factory with high humidity and much dust. -
Đèn cây tín hiệu Patlite LR5 (LED signal Tower Lights)
perating Ambient Temperature -20℃ – +50℃
Operating Humidity Range 90% RH or less, no condensation
Storage Temperature Range -30℃ – +60℃
Storage Humidity Range 90% RH or less, no condensation
Mounting Location Indoor Use
Mounting Direction Upright Position
Protection Rating*1 IP65(IEC 60529) / NEMA TYPE 4X, 13
Environmental Conditions Upright Position
Insulation Resistance More than 1MΩ at DC500V between the power input lead and chassis
Withstand Voltage AC 500V for 1 minute between terminals and chassis without breaking insulation (M2: AC1500V for 1 min.)
Flash Rate 60 ±2 Flashes / min
Sound Level LR5Typ. 85dB LR5 DC12VTyp. 80dB
Sound Reduction*2 ab. -10dB reduction
Environmental Conditions Buzzer Sound No.4 (Sweep) from all directions at a 1m distance
Buzzer Sound 4 patterns*2 No.1Rapid Intermittent sound No.2Continuous sound No.3Rapid Hi-low No.4Sweep sound
Transistor Output NPN / PNP
Conformity Standards ●UL 508, CSA-C22.2 No.14
●FCC Part 15 Subpart B Class A
●RoHS Directive (EN 50581)
●EMC Directive (EN 61000-6-4, EN 61000-6-2)
●KC (KN 61000-6-4, KN 61000-6-2)*3 -
Đèn đo nhiệt kế bức xạ ESCO EA701XJ-1 (Infrared Thermometer)
easurement range- -33 to 250℃
Resolution-0.1℃
Accuracy-Larger value of ±2.0%rdg or 2.0℃
Distance factor-1:1
Emissivity-0.95 (fixed)
Function-LED light, low battery display, Celsius/Fahrenheit temperature conversion
Power supply-Body: LR44 x 2 pcs, LED: AAA battery x 1 pc
Dim.-Dia. 13 x 145mm
Weight-60g
Accessories-Storage case (aluminum)
Intense LED light illuminating even a dark site
Can be carried in the chest pocket. -
-
Đèn led ESCO EA758RM-15 (LED Light)
ight source-LED bulb
Brightness-250 lumen(Strong), 25 lumen(Middle), 5 to 10 lumen(Low), 250 lumen(SOS flashing )
With SOS flashing function.
Battery life-approx.6 hours(strong), approx.60 hours(medium), approx.150 to 200 hours(weak), approx.12 hours(SOS flashing)
Size-φ32x144mm
Weight-188g (including batteries)
Material-Aluminum
With Holster, Strap
Battery-CR123A x 2 pcs(separately sold) -
Đèn pin ESCO EA758RE-2S (LED Pocket Light)
Light Source LED
Diffused Light
Irradiation Pattern Lighting Up /Flashing
Brightness 180Lumens (Strong )、
9Lumens (Weak )、
180Lumens (Flashing )
Body Material Aluminum
Battery AAA Battery ×2 Pcs (included)
Battery Life About 3Hour (Strong )、
About 50Hour (Weak )、
About 5Hour (Flashing )
Irradiation Distance 76m(Strong )
Size Dia 14.5×135.9mm
Weight 52.6g(Including Batteries)
Body Color Silver
Accessories Holster -
Đèn pin ESCO EA758SG-1 (LED Pen-Type Light)
Light source-LED bulb
Brightness-90 lumens
Battery life-Approx. 6.5 hours
Diffused light
Dim.-Dia. 15 x 135mm
Weight-47g (including batteries)
With light holster
Color Black
Battery AAA size battery x 2 pcs (included)
Irradiation distance 58m -
Đèn pin ESCO EA758SG-4 (LED Pen-Type Light)
Light source-LED bulb
Brightness-90 lumens
Battery life-Approx. 6.5 hours
Diffused light
Dim.-Dia. 15 x 135mm
Weight-47g (including batteries)
With light holster
Color Red
Battery AAA size battery x 2 pcs (included)
Irradiation distance 58m
Additional explanation -
Đèn quay Patlite RHE (LED Revolving Warning Light)
DIMENSIONS – 100mm diameter
RATED VOLTAGE – 12V DC (Special Order)
– 24V DC
FUNCTIONS – Rotating
– Rotating with Alarm
MOUNTING – Direct Mount
– Indoor: Upright, Inverted, Sideways
– Outdoor: Upright Only
BODY STYLE – Round base
– Round top, colored dome
– Pre-assembled, terminals provided
– Optional SZ-200A gasket to increase the IP Rating
BODY COLOR – Body: Beige
GLOBE COLOR – Light Source: LED
– Dome Colors: Red / Amber / Green / Blue
GLOBE MATERIAL – Polycarbonate Resin
AUDIBLE STYLE – RHEB: 1 built-in alarm; Typical Output: 88dB/m, Minimum: 83dB/m
– Volume is not adjustable
CONFORMITY STANDARDS – CE Marking
– RoHS Compliant
PROTECTION RATING – IP-23 without optional SZ-200A gasket
– IP-55 with optional SZ-200A gasket
OPTIONS – SZ-30T
– SZ-30L
– SZ-007
– SZ-008
– SZ-200A -
Đèn sửa sản phẩm Rolence Ultra-lite 1000E (Dual) (LED Curing Light)
Incorporates blue and violet LEDs to achieve broad-band wavelength range of 390 to 480nm output to virtually polymerize all the light-activated porcelain material (including sanitary wares, dental material, glass-ionomer containing products) in the market.
2. A halogen-like solution at L.E.D. long life time; a durable choice indeed.
3. Highest light-energy output 2,000 mW/cm²; 3 second super-fast curing.
4. Polymerize a 2-mm-thick composite resin specimen just in 3 seconds.
5. Four Modes preset, including cycle curing for orthodontics.
6. Light guide rotates 360˚ to access any curing part of mouth.
7. Optional fiber optic curing tips in different diameter are available.
8. All curing tips are sterilizable to achieve higher clinical infection control.
9. Super high-capacity (2,600mA) lithium battery inside supports 500 cycles of 5 second curing prior to re-charging.
10. Palm-size, light-weight handpiece for comfortable hand holding.
11. A perfect product for clinicians with smaller hand.
12. A built-in Light checker in the charging base. -
Đèn tháp Patilie LR6 (LED Signal Tower Lights)
Operating Ambient Temperature -20℃ – +50℃
Operating Humidity Range 90% RH or less, no condensation
Storage Temperature Range -30℃ – +60℃
Storage Humidity Range 90% RH or less, no condensation
Mounting Location Indoor Use
Mounting Direction Upright Position
Protection Rating*1 IP65(IEC 60529) / NEMA TYPE 4X, 13
Environmental Conditions Upright Position
Insulation Resistance More than 1MΩ at DC500V between the power input lead and chassis
Withstand Voltage AC 500V for 1 minute between terminals and chassis without breaking insulation (M2: AC1500V for 1 min.)
Flash Rate 60 ±2 Flashes / min
Sound Level LR6Typ. 88dB
Sound Reduction*2 ab. -10dB reduction
Environmental Conditions Buzzer Sound No.4 (Sweep) from all directions at a 1m distance
Buzzer Sound 4 patterns*2 No.1Rapid Intermittent sound No.2Continuous sound No.3Rapid Hi-low No.4Sweep sound
Transistor Output NPN / PNP (AC100 – 240V is NPN only)
Conformity Standards ●UL 508, CSA-C22.2 No.14
●FCC Part 15 Subpart B Class A
●RoHS Directive (EN 50581)
●EMC Directive (EN 61000-6-4, EN 61000-6-2)
●KC (KN 61000-6-4, KN 61000-6-2)*3
●Low-voltage Directive (IEC/EN 60947-5-1, EN62471)*4 -
Kìm ép cốt ESCO EA538JF
Item# :EA538JF
Description : Crimping Pliers (for Uninsulated Terminal)
-
Kính bảo hộ ESCO EA800AL-5 (Protective glasses)
Lens color : clear
Polycarbonate lens
Vine length adjustable
Glasses size A:140mm、B:110mm、
C:70mm、D:40×70mm、 -
Kính che mặt chịu nhiệt Trusco BM-KC (Face shield)
Features
●Spherical injection molding type with no reflection from the back, and the view is clear.
Specification
●SPQ(piece):25
●Ultraviolet Rays Transmittance 313nm: 0.001%, 365nm: 0.001%
●With upper peak
●Lens Thickness: 1.8mm
Materials
●Lens: Polycarbonate (scratch prevention processing) -
Ống bảo vệ dầy (ruột gà) ESCO EA944BX-1.5 (Spiral Tube)
・Material-Polyethylene
・Length-10m
・Heat-proof temperature-75℃
・Cables and cords can be bundled easily.
・The tube can be cut to a desired length.
・The spiral shape will be kept permanently, allowing reuse.
・ID…1.5mm
・Max. bundle dia.…18mm -
Ống bảo vệ dầy (ruột gà) ESCO EA944BX-4 (Spiral Tube)
Material-Polyethylene
Length-10m
Heat-proof temperature-75℃
Cables and cords can be bundled easily.
The tube can be cut to a desired length.
The spiral shape will be kept permanently, allowing reuse.
ID : 4mm
Max. bundle dia. : 50mm -
Ống co nhiệt ESCO EA944BG-2 (Heat Shrink Tube)
Color-Black
Withstand voltage-600V
Material-Polyolefin
Applying heat of 90℃ makes the tube shrink by 50% in diameter.
Pre-shrinkID 2.0mm
Post-shrinkID 1.0mm
Length 10m
Additional explanation -
Ống co nhiệt ESCO EA944BH-11 (Heat Shrink Tube Set)
Material Polyethylene
Length 45mm
ID.(mm)(before・after shrink) φ2・φ1, φ3.5・φ1.75, φ5・φ2.5, φ7・φ3.5, φ8・φ4, φ9・φ4.5
Quantity 15Pcs. each
Withstand voltage 600V
Color φ2~φ9mm:Black, φ2mm:White, φ3.5mm:Green, φ5mm:Red, φ7mm:Blue, φ8mm:Yellow, φ9mm:Green
When heated at 110℃, it shrinks 50 percents (in diameter).
RoHS-compliant.
Additional explanation